FAQ: How Do Clothing Security Tags Work?

The tag is a small “signal transmitter” that you put on the merchandise that you want to protect. The tag will signal to the EAS antennas to make them alarm if they come to close. E.g. if someone is trying to steal the item and take them through the exit without paying/removing the tag.

Are clothes security tags filled with ink?

But there’s an important reason security tags are filled with ink –– it can be a helpful measure for retailers and deter potential shoplifters. If an item with an ink tag is purchased at a store, the cashier will remove it with a special device called a detacher after the customer pays.

How do stick on security tags work?

In the case of clothing and soft items, the security tag is affixed to an item using a pin, which passes through the fabric of the product. This pin then locks into the security tag. There are two common types of locking mechanisms used within security tags – mechanical locks and magnetic locks.

You might be interested:  FAQ: Room Where Clothing Is Kept?

How do you know if security tag has ink in it?

Ink tags: First determine if the tag is an ink tag, which is usually white or red and circular and usually says it contains red, pink, or blue and yellow ink that may combine. If you try to remove it improperly the tag will “explode” marking the thief — or you — and the item with ink.

Do ink tags trigger alarms?

Ink Tags. Ink tags are geared toward preventing shoplifting instead of triggering an alarm when a theft does occur. They typically are used on clothing items that would be ruined if stained with ink.

How do you stop a security tag from beeping?

Although it may sound too simple to be true, yes, you can stop the alarm from going off by covering the tags with a conductive material. The aluminum foil bag example in the beginning works because of a concept called ‘electromagnetic shielding’.

Where is the ink in a security tag?

The ink cartridge is the part of the tag that juts out of the plastic. It is on the opposite side of the pin, which is the round part of the tag.

How do you identify shoplifters?

Other tell-tale signs of shoplifters include:

  1. Wearing large coats or baggy clothes.
  2. Avoiding eye contact.
  3. Watching the staff, not the merchandise.
  4. Seeking shelter in dressing rooms to stash smuggled merchandise.
  5. Lurking in corners.
  6. Taking advantage of stores during peak hours.

Do security tags have alarms?

The tags will sound an alarm if they come to close to the antennas. This will make it easy for your security staff to intervene when someone is trying to steal something. The antennas in themselves also look deterrent to potential shoplifters, they will if possible choose a different store to steal from instead.

You might be interested:  Question: How To Get The Smell Of Urine Out Of Clothing?

Can you cut security tags with wire cutters?

You can just cut through the cable with wire cutters if you do not have a magnet detacher. If you try to use regular scissors, you will absolutely destroy your scissors.

What happens when you cut security tag?

If you take the security tag off the jacket and leave the store with it, on top of being charged with removal of the device, you could also be prosecuted for theft. The charges for this offense range from a simple misdemeanor to a class “C” felony. Again, the level depends on the value of the stolen item.

How do you turn off magnetic security strips?

To deactivate the magnetic security strip, all that need be done is to magnetize the strip along its length. This can be done by applying a sufficiently strong magnetic field along the length of the strip.

Does security tag ink wash out?

Security ink is permanent, which makes it difficult to get out of clothes. According to the Iowa State County Extension Office, treat the stain immediately and blot it rather than rubbing, which will only spread the mess.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top