Question: What Is Hps In Clothing Measurements?

High Point Shoulder (HPS) is measured from the highest point of the shoulder to the bottom hem of the shirt. Bust/Width measures across the bust 1” below the armhole, seam to seam.

What does HSP stand for in clothing?

Length (HSP) is center front length measured from highest point on the shoulders (HSP) to the bottom hem.

What is HPS shirt?

The HPS is the high point of your shoulder. It is the seam on the shirt that is stitched from the sleeve to the collar on both sides.

What is the HPS in garment industry?

You have probably seen the letters “HPS” if you have perused SBCC finished garment measurements. This acronym stands for High Point of Shoulder. The highest point of the shoulder is the best position, in my opinion, of fixed placement that works for most tops, blouses, dresses, etc. to judge length.

What is SNP in garment?

2 Waist – At point specified below HPS (High Point Shoulder) or SNP ( Side Neck Point ). Measurement is taken straight across, edge to edge.

You might be interested:  FAQ: How To Find Your Clothing Size?

How do you measure garment guide?

How to measure a shirt

  1. Chest is measured along line A.
  2. Shoulder is measured along line B, from shoulder tip to shoulder tip.
  3. Sleeve Length is measured from point C to D to E.
  4. Back Length is measured along line F, on the back of the shirt from the seam at the base of the collar to the bottom hem of the shirt.

What is HPS front length?

High Point Shoulder (HPS) is measured from the highest point of the shoulder to the bottom hem of the shirt. Measurements are in inch. High Point Shoulder (HPS) is measured from the highest point of the shoulder to the bottom hem of the shirt. Bust/Width measures across the bust 1” below the armhole, seam to seam.

What is center b/l measurement?

So you measure from the center of the back to the bottom of the shirt. That gives you the length starting from the center back which is right below the collar.

What is sweep measurement?

Sweep. The sweep is the circumference of the bottom hem of a skirt, dress, coat, or jacket. For a jacket or coat, measure the sweep across the bottom hem from open edge to open edge. For a skirt or dress, measure the sweep by laying the garment flat with seams matched, measure end to end, then double.

How is yoke height measured?

The yoke is measured from the outside seam, where the yoke joins the sleeve, across the top of the shoulders (below the collar) to the opposite side. The yoke should fit comfortably on the “outside edge” of the shoulders. The tape should not drop below the prominent neck bone.

You might be interested:  Often asked: How To Remove Blood Stain From Clothing?

What is point measurement?

The point of measurement is the combination of the meter and its location.

How spec a garment basic points of measure for apparel?

Bottom Sweep: measure horizontally straight across from side to side at the bottom of the garment. CB – Center Back: measure vertically down the center of the back of the garment. CF – Center Front: measure vertically down the center of the front of the garment. Body Length: measure from HPS to Bottom Sweep.

What is sizing in fashion?

Clothing size refers to the label sizes used for garments sold off-the-shelf. There are a large number of standard sizing systems around the world for various garments, such as dresses, tops, skirts, and trousers. (For example: Size 12, XL.)

What is the sleeve length?

To measure your sleeve length: Measure from the center back of your neck (at your spine) to the end of your shoulder at the top of your arm. 2. Measure from your shoulder to just past your wrist bone to where you would like your shirt cuff to sit. Always slightly bend the elbow when measuring to allow for extra ease.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top